AudioSpeakerMode 音频扬声器模式

# AudioSpeakerMode 音频扬声器模式

Enumeration

These are speaker types defined for use with [AudioSettings.speakerMode](../../AudioSettings/AudioSettings.speakerMode.html).

这些被定义的扬声器类型是用于 [AudioSettings.speakerMode](../../AudioSettings/AudioSettings.speakerMode.html)。

Your project's default speaker mode can be set in the Audiomanager through
Edit->Project Settings->Audio.

项目默认扬声器模式可以通过 Audio manager 设置，在菜单 Edit->Project Settings->Audio

参见： [AudioSettings](../../AudioSettings/AudioSettings.html)

### Values**值**

* [Raw](AudioSpeakerMode.Raw.html)
  Channel count is unaffected.
  通道数量不受影响。
* [Mono](AudioSpeakerMode.Mono.html)
  Channel count is set to 1. The speakers are
  monaural.
  通道数设置为 1。扬声器是单声道。
* [Stereo](AudioSpeakerMode.Stereo.html)
  Channel count is set to 2. The speakers are stereo. This is
  the editor default.
  通道数设置为 2。扬声器是立体声。这是编辑器的默认。
* [Quad](AudioSpeakerMode.Quad.html)
  Channel count is set to 4. 4 speaker setup. This includes
  front left, front right, rear left, rear right.
  通道数设置为 4。四声道扬声器。包含前左，前右，后左，后右。
* [Surround](AudioSpeakerMode.Surround.html)
  Channel count is set to 5. 5 speaker setup. This includes
  front left, front right, center, rear left, rear
  right.
  通道数设置为 5。五声道扬声器。包含前左，前右，中间，后左，后右。
* [Mode5point1](AudioSpeakerMode.Mode5point1.html)
  Channel count is set to 6. 5.1 speaker setup. This includes
  front left, front right, center, rear left, rear right and a
  subwoofer.
  通道数设置为 6。5.1 声道扬声器。包含前左，前右，中间，后左，后右，低音炮。
* [Mode7point1](AudioSpeakerMode.Mode7point1.html)
  Channel count is set to 8. 7.1 speaker setup. This includes
  front left, front right, center, rear left, rear right, side left, side right
  and a subwoofer.
  通道数设置为 8。7.1 声道扬声器。包含前左，前右，中间，后左，后右，侧左，侧右和一个低音炮。
* [Prologic](AudioSpeakerMode.Prologic.html)
  Channel count is set to 2. Stereo output, but data is
  encoded in a way that is picked up by a Prologic/Prologic2 decoder and split
  into a 5.1 speaker
  setup.
  通道数设置为 2。立体声输出，但是数据被编码，通过 Prologic/Prologic2 解码器和分为 5.1 扬声器设置。